44. Classic Slide Tube Assembly
$60.00
44. Classic Slide Tube Assembly
$60.00
The Model 37 Classic Slide tube features a threaded nut on the rear and a bar Heliarc welded to the tube. This tube has been on most Model 37s throughout the years of manufacturing.
*Different years of manufacturing require different lengths of the tube. To ensure proper fit, please refer to the length descriptions before proceeding.
Depending on condition, discontinued parts may possibly be repaired by Ithaca, but require the actual wood forend, original tube, and nut to be sent to Ithaca Service for proper fitting.
Although the 16ga is technically a 2-3/4” receiver, it will also utilize the 3” slide tube. Customers can send in a broken 2-3/4” slide tube and we will attempt to repair it.
Typical Part sizes:
3″ Guns manufactured after 1978 or Serial Number 371650000 / Bar Length 6″; Tube Length 5 7/8″
2 3/4″ Guns prior to 1978 or s./n. 371650000 / Bar Length 5 3/4″; Tube Length 6″ or 6 1/4″ (These parts have been discontinued and are no longer in production.) Although the 16ga is technically a 2-3/4” receiver, it will also utilize the 3” slide tube. Customers can send in a broken 2-3/4” slide tube and we will attempt to repair it.
The Model 37 Classic Slide tube features a threaded nut on the rear and a bar Heliarc welded to the tube. This tube has been on most Model 37s throughout the years of manufacturing.
*Different years of manufacturing require different lengths of the tube. To ensure proper fit, please refer to the length descriptions before proceeding. Depending on condition, discontinued parts may possibly be repaired by Ithaca, but require the actual wood forend, original tube, and nut to be sent to Ithaca Service for proper fitting.
Additional information
| Weight | 4.1 lbs |
|---|---|
| Dimensions | 12 × 1.31 × 12 in |
| Gauge | 12 Gauge, 16 Gauge, 20 Gauge, 28 Gauge |
| Finish | Blued, Black Parkerized, Matte Blued, PermaGuard |
| Length | 2 3/4", 3" |
